|
Export DXF to Structure File (xtp) 20 messages
#Parameter
#structure
Happy to do it. I wanted a way to take my CAD drawings and convert them to structures. It grew from there. Be sure to share what you've done if it might be useful to other modelers.
Happy to do it. I wanted a way to take my CAD drawings and convert them to structures. It grew from there. Be sure to share what you've done if it might be useful to other modelers.
|
By
Russell Shilling
·
|
|
Corrupt xtq file? 18 messages
#Parameter
OK that layout file does not contain any references to other than HO scale. I think it must either be in one of the param files you are loading at startup (names are taken from in the xtrkcad.ini file
OK that layout file does not contain any references to other than HO scale. I think it must either be in one of the param files you are loading at startup (names are taken from in the xtrkcad.ini file
|
By
Adam Richards
·
|
|
Marklin catenary? 8 messages
#Parameter
Joost, Sorry I have not had the time to look at this yet. Thanks for the update.
Joost, Sorry I have not had the time to look at this yet. Thanks for the update.
|
By
Dwyane Ward
·
|
|
A couple of additions to a parameter file
#Parameter
Hi guys, Here's a small contribution to the community - an update of the "Dapol" parameter file to add the "Ticket Office" and "Country Church" kits. The dimensions may not be absolutely accurate but
Hi guys, Here's a small contribution to the community - an update of the "Dapol" parameter file to add the "Ticket Office" and "Country Church" kits. The dimensions may not be absolutely accurate but
|
By
Rob Pearce
·
|
|
Curved contact track upside down M-track
#Parameter
The contact track 5104 is defined just upside down compared to all other curved tracks in the M-track xpt file Of course it works fine when working with it. It is just a matter the way it shows in the
The contact track 5104 is defined just upside down compared to all other curved tracks in the M-track xpt file Of course it works fine when working with it. It is just a matter the way it shows in the
|
By
Joost van der Waa
·
|
|
Double slip and single slip definitions 28 messages
#Parameter
#V5dot2dot1
I've updated the paths for the 'monster' TURNOUT def'n (aka " Maerklin M HarfeL22°5 2x5138 + 1x5207 + 2x5210" and " Maerklin M HarfeR22°5 2x5139 + 1x5207 + 2x5210" These Paths look like (based on Auto
I've updated the paths for the 'monster' TURNOUT def'n (aka " Maerklin M HarfeL22°5 2x5138 + 1x5207 + 2x5210" and " Maerklin M HarfeR22°5 2x5139 + 1x5207 + 2x5210" These Paths look like (based on Auto
|
By
Dave Bullis
·
|
|
Marklin turntable track 7287 definition 3 messages
#Parameter
On Sat, Dec 5, 2020 at 08:16 PM, Dwyane Ward wrote: Thanks, looks great. I suppose the only further comment I'd have is that the 7287's label still says 38mm in the K-track file, but functionally it's
On Sat, Dec 5, 2020 at 08:16 PM, Dwyane Ward wrote: Thanks, looks great. I suppose the only further comment I'd have is that the 7287's label still says 38mm in the K-track file, but functionally it's
|
By
Colin
·
|
|
Parameter file library defaulting to previous version folder 12 messages
#V5dot2dot1
#Parameter
Hi Adam, Sorry, I misread your initial reply and only searched for "param" (and then encountered the file section). My paths section reads like this: [paths] layout=X:\Data\Treinen\Xtrackcad bitmap=D:
Hi Adam, Sorry, I misread your initial reply and only searched for "param" (and then encountered the file section). My paths section reads like this: [paths] layout=X:\Data\Treinen\Xtrackcad bitmap=D:
|
By
Joost van der Waa
·
|
|
Hot Bar problem after adding a custom Structure 3 messages
#Parameter
#V5dot2dot1
OK - a fix has been found. The issue was in displaying the button (the end of the list was being truncated one space too early) and in displaying the content (the presence of the fixed LHS Cornu eleme
OK - a fix has been found. The issue was in displaying the button (the end of the list was being truncated one space too early) and in displaying the content (the presence of the fixed LHS Cornu eleme
|
By
Adam Richards
·
|
|
New param header field 5 messages
#Parameter
Thanks Dave
By
Dwyane Ward
·
|
|
New User Questions 5 messages
#FAQ
#Parameter
#HowTo
Re: fixed radius curves I use the Circle Track command for this. Set the desired radius and then drag the circle around on your layout. Then use the Join command to attach to the circle (turning it in
Re: fixed radius curves I use the Circle Track command for this. Set the desired radius and then drag the circle around on your layout. Then use the Join command to attach to the circle (turning it in
|
By
Dave Bullis
·
|
|
G-NMRA-RP12-23 Corrections and Additions 5 messages
#Parameter
Thank you.
By
Russell Shilling
·
|
|
Parameter file for Märklin C 24771, 24772 and 24315 3 messages
#Parameter
Hello Dwyane, Thank you very much for adding the three tracks to the parameterfile. greetings Jörg
Hello Dwyane, Thank you very much for adding the three tracks to the parameterfile. greetings Jörg
|
By
Jörg Sternberg
·
|
|
Input error - track segment not on path 9 messages
#beta
#Parameter
Couple of pointers about Update Turnouts and Structures - 1) The names must match. If you updated the label of the turnout or structure - it will fail to find it 2) The endpoint count and their positi
Couple of pointers about Update Turnouts and Structures - 1) The names must match. If you updated the label of the turnout or structure - it will fail to find it 2) The endpoint count and their positi
|
By
Adam Richards
·
|
|
display error with Turn Table 8 messages
#Parameter
Jacques, There was a subsequent fix to the parameter file to change the "a"s into an "A"s that I forgotten about. Sorry about that. This the current version. Adam
Jacques, There was a subsequent fix to the parameter file to change the "a"s into an "A"s that I forgotten about. Sorry about that. This the current version. Adam
|
By
Adam Richards
·
|
|
Micro Engineering Yard Ladder Discrepancy? 4 messages
#Parameter
Hi Dwayne Thank you for the clarification, I really appreciate it!!!! I appreciate everything the development crews do for this great design program so if I come across nasty or gruff, I really did no
Hi Dwayne Thank you for the clarification, I really appreciate it!!!! I appreciate everything the development crews do for this great design program so if I come across nasty or gruff, I really did no
|
By
Allan
·
|
|
Tomix N Wide Track - Error in the drawing for 5 messages
#Bug
#Parameter
Hi Adam, I dropped the XTI files into Dwyane's folder so he could access and accumulate them. Looks like he has built them into a Param file so now I need to grab them back again. Or at least help him
Hi Adam, I dropped the XTI files into Dwyane's folder so he could access and accumulate them. Looks like he has built them into a Param file so now I need to grab them back again. Or at least help him
|
By
Ian
·
|
|
Can I lock in the Green colour for the Tomix Green Lawn Tram Track, S70-WT-G? 3 messages
#Parameter
Ian, In V5.2 Options->Display, you can choose globally to color tracks by layer (or individually) and likewise Draw Objects (non-tracks like structures). If you do color by layer, each layer also has
Ian, In V5.2 Options->Display, you can choose globally to color tracks by layer (or individually) and likewise Draw Objects (non-tracks like structures). If you do color by layer, each layer also has
|
By
Adam Richards
·
|
|
XTI Conversion: From an N scale item up to an OO/HO item?? 7 messages
#HowTo
#Parameter
No, Dave, had no idea about that aspect. I don't think that I have ever used that. I always just follow the steps as demonstrated in the video. Is that how Dwyane took my Scalescenes XTI files and mad
No, Dave, had no idea about that aspect. I don't think that I have ever used that. I always just follow the steps as demonstrated in the video. Is that how Dwyane took my Scalescenes XTI files and mad
|
By
Ian
·
|
|
More N ScaleScenes files uploaded to the Card Structures folder
#Parameter
I have added another half-dozen N scale ScaleScenes outlines to the Card Structures folder. https://xtrackcad.groups.io/g/main/files/Card%20Structures%20-%20Scalescenes%20and%20others I hope these are
I have added another half-dozen N scale ScaleScenes outlines to the Card Structures folder. https://xtrackcad.groups.io/g/main/files/Card%20Structures%20-%20Scalescenes%20and%20others I hope these are
|
By
Ian
·
|